Products
Polycarbonate Flat Punched Carrier Tape
Sinho's Flat Punched Carrier Tape yakagadzirirwa vatungamiriri veTape neReel uye matirarera echikamu chechikamu reels, uye akakodzera kushandiswa nevakawanda SMT pick nekuisa feeder.Sinho's Flat Punched Carrier Tape inowanikwa kuti igadzirwe nebhodhi reukobvu uye saizi tepi mune yakajeka & nhema polystyrene zvinhu, nhema polycarbonate zvinhu, yakajeka polyethylene terephthalate zvinhu, uye machena mapepa zvinhu.Iyi tepi yakaroverwa inogona kuiswa kune iripo SMD reels kuti iwedzere kureba uye kudzivirira tsvina.
Polycarbonate (PC) Flat Punched Carrier Tape inofambisa zvinhu zvitema zvinodzivirira zvikamu kubva kune electrostatic discharge (ESD).Ichi chinyorwa chinowanikwa mubhodhi rehupamhi hwehukobvu kubva 0.30mm kusvika 0.60mm kune akasiyana siyana tepi kubva 4mm kusvika 88mm.
Details
| Yakagadzirwa ne polycarbonate conductive nhema zvinhu zvinodzivirira kubva ESD | Inowanikwa mubhodhi renji yekukora kubva 0.30 kusvika 0.60mm | Anowanikwa saizi kubva 4mm kusvika 88mm | ||
| Inokodzera pane ese makuru SMT tora uye isa ma feed | Inowanikwa mu400m, 500m, 600m kureba | Hurefu hwetsika huripo |
Available Widths
Wide8-24mm chete nemaburi e sprocket
| SO | E | PO | DO | T | |
| / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 | |
| 12.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
| 16.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
| 24.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
Typical Properties
| Brands | SINHO | |
| Color | Nhema | |
| Material | Polycarbonate (PC) Conductive | |
| Upamhi Hwose | 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, 72mm, 88mm, | |
| Ukobvu | 0.3mm, 0.4mm, 0.5mm, 0.6mm kana zvimwe zvinodiwa ukobvu | |
| Urefu | 400M, 500M, 600M kana imwe tsika kureba |
Material Properties
| Zvinhu Zvenyama | Test method | Unit | Value |
| Specific Gravity | ASTM D-792 | g/cm3 | 1.25 |
| Mold Shrinkage | ASTM D955 | % | 0.4-0.7 |
| Mechanical Properties | Test method | Unit | Value |
| Tensile Simba | ASTM D638 | Mpa | 65 |
| Flexural Strength | ASTM D790 | Mpa | 105 |
| Flexural Modulus | ASTM D790 | Mpa | 3000 |
| Notched Izod Impact Simba (3.2mm) | ASTM D256 | J/m | 300 |
| Thermal Properties | Test method | Unit | Value |
| Melt Flow Index | ASTM D1238 | g/10min | 4-7 |
| Electrical Properties | Test method | Unit | Value |
| Surface Resistance | ASTM D-257 | Ohm/sq | 104~5 |
| Flammability Properties | Test method | Unit | Value |
| Flame Rating @ 3.2mm | Internal | NA | NA |
| Processing Conditions | Test method | Unit | Value |
| Barrel Temperature | | °C | 280-300 |
| Mold Temperature | | °C | 90-110 |
| Kuomesa Tembiricha | | °C | 120-130 |
| Kuomesa Nguva | | Awa | 3-4 |
| Injection Pressure | MED-HIGH | ||
| Bata Pressure | MED-HIGH | ||
| Kukurura Speed | ZVIRI MUKATI | ||
| Back Pressure | LOW | ||
Sherufu Hupenyu uye Kuchengeta
Chigadzirwa chinofanira kushandiswa mukati megore 1 kubva pazuva rekugadzirwa.Chengetedza mupakeji yayo yepakutanga munzvimbo inodzorwa nemamiriro ekunze uko tembiricha inotangira pa0 ~ 40 ℃, hunyoro hunoenderana <65%RHF.Ichi chigadzirwa chinodzivirirwa kubva kune zuva rakananga
Camber
Inosangana neyazvino EIA-481 chiyero checamber iyo isiri yakakura kupfuura 1mm mu250 millimita kureba.
Zviwanikwa
| Zvinhu Zvenyama Zvekushandisa | Kudhirowa |
| Safety Tested Reports |
