Products
Polyethylene Terephthalate Flat Punched Carrier Tape
Sinho inopa huwandu hweFlat Punched Carrier Tapes muzvinhu zvakasiyana-siyana, zvinosanganisira yakajeka uye yakasviba polystyrene, black polycarbonate, clear polyethylene terephthalate (PET), uye chena mapepa. Sinho's Polyethylene terephthalate (PET) Flat Punched Carrier Tape yakagadzirirwa vatungamiriri veTepi neReel uye matirarera echikamu chechikamu reels, Inopindirana nevakawanda veSMT vanotora uye kuisa mafeed. Iyi tepi yakaroverwa inogona zvakare kuiswa pane iripo SMD reels kuti iwedzere kureba uye kuderedza marara.
Polyethylene terephthalate (PET) Flat Punched Carrier Tape chinhu chakajeka chinodzivirira. Inopihwa muhukobvu hwe 0.3mm, 0.4mm, 0.5mm, uye 0.6mm, ine sarudzo yakakura yetepi hupamhi kubva pa4mm kusvika 88mm. Customization yezvose ukobvu uye kureba inowanikwa pakukumbira.
Details
| Yakagadzirwa ne polyethylene terephthalate yakajeka zvinhu | Inopihwa muhupamhi hwehupamhi, kubva 0.30mm kusvika 0.60mm | Saizi iripo inotangira pa4mm kusvika 88mm | ||
| Inoenderana nemhando dzakasiyana dzeSMT tora uye isa ma feed | Ichi chigadzirwa chinouya mukureba kwe400m, 500m, uye 600m | Saizi yakasarudzika uye kureba zvinogona kugariswa |
Available Widths
Wide8-24mm chete nemaburi e sprocket
| SO | E | PO | DO | T | |
| / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 | |
| 12.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
| 16.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
| 24.00 ±0.30 | / | 1.75 ±0.10 | 4.00 ±0.10 | 1.50 +0.10/-0.00 | 0.30 ±0.05 |
Typical Properties
| Brands | SINHO | |
| Color | Pachena | |
| Material | Polyethylene Terephthalate (PET) Insulative | |
| Upamhi sarudzo dzinosanganisira | 4mm, 8mm, 12mm, 16mm, 24mm, 32mm, 44mm, 56mm, 72mm, uye 88mm | |
| Ukobvu | sanganisira 0.3mm, 0.4mm, 0.5mm, 0.6mm, kana tsika ukobvu sezvinodiwa | |
| Urefu | 400M, 500M, 600M, kana customizable kureba pakukumbira |
Material Properties
| Zvinhu Zvenyama | Test method | Unit | Value |
| Specific Gravity | ASTM D-792 | g/cm3 | 1.36 |
| Mechanical Properties | Test method | Unit | Value |
| Tensile Simba @Yield | ISO527-2 | MPA | 90 |
| Tensile Elongation @Break | ISO527-2 | % | 15 |
| Electrical Properties | Test method | Unit | Value |
| Surface Resistance | ASTM D-257 | Ohm/sq | / |
| Test method | Unit | Value | |
| Kupisa kunokanganisa tembiricha | ISO75-2/B | ℃ | 75 |
| Optical Properties | Test method | Unit | Value |
| Light Transmission | ISO-13468-1 | % | 91.1 |
Sherufu Hupenyu uye Kuchengeta
Ichi chigadzirwa chinochengetedza hunhu hwacho kwegore rimwe pasi pekurudziro yekuchengetera mamiriro: Chichengetedze mupakeji yayo yepakutanga, chengetedza pakati pe0 ℃ kusvika 40 ℃, ine hunyoro huri pasi pe65% RHF, uye chengetedza kubva kuzuva rakananga nehunyoro.
Camber
Inosangana neyazvino EIA-481 chiyero checamber isingapfuuri 1mm mu250 millimita kureba.
Zviwanikwa
| Zvinhu Zvenyama Zvekushandisa | Kudhirowa |
| Safety Tested Reports |
